©2019 by HOVERSURF.



Get in Touch

California, USA



Hoverbike S3 2019 fact sheet

  • Body: monocoque frame made of different types of carbon, the whole frame is made by a single element, which gives the stiffness of the structure by forming spatial stiffeners, and a weight reduction of 2 times compared to the aluminum frame of the previous model.

  • Ergonomics: hoverbike design allows it to be rolled through a standard doorway while being able to take off and land from an ordinary parking space.

  • Weight: 114 kg (253 pounds) limited by law.

  • Battery: hybrid INR battery with a capacity of 12.3 kWh.

  • Flight time: up to 40 minutes in the drone mode. Actual flight time with the pilot is 10 to 25 minutes and depends on weight and flight conditions. Quick charging in 2.5 hours without removing the batteries.

  • Cooling: passive cooling system, which works due to the difference in air pressure above and below the propellers.

  • Engine: 30 kW motors each, 3-bladed carbon fiber propellers 120 cm and give a total thrust of 364 kg (802 pounds).

  • Altitude: the recommended flight altitude is 5 meters above the ground (16 feet), but the pilot can adjust the height limit.

  • Speed: maximum speed is limited to 96 km / h (60 m / Ph or 52 knots) according to the requirements of the laws.

  • Legalization: done. The official confirmation was issued by the Federal Aviation Agency of the United States (FAA).